Nema24 Closed Loop Stepper Motor and HBS57 Driver Bundle – 3.0Nm

• Closed-loop Stepper Motor Specifications:

  • Voltage: 2.25VDC
  • Rated Current: 5A
  • Motor Inductance: 1.8mH
  • Holding Torque: 3.0Nm
  • Encoder cable length: 5000m
  • Motor cable length: 500mm
  • Weight: 1.6kg

  Features of the Closed-loop Stepper Motor:

  • High-performance and low inductance Closed-Loop Hybrid Stepper Motor.
  • Comes with a handy 5m long encoder cable for ease of wiring.
  • Low vibration and high efficiency.
  • Built-in quadrature encoder. (1000 line encoder)
  • High precision ensures precise carving in CNC applications

  Included:

  • 3.0Nm Closed Loop Stepper Motor
  • 5m long encoder cable
  • HBS57 Closed-loop Stepper Motor Driver
  • 1m 2 Core DC power cable.

Motor Coil Wiring Diagram

Encoder Lead Pinout

HBS57 Closed-loop Stepper Motor Driver Features:

• Anti-Resonance features provide smooth operation through the RPM range.
• Low noise and low vibration.
• 32bit processor and improved DSP control.
• Closed-loop vector control technology.
• Multi-Stepping allows a low-resolution step input to produce a higher microstep output for smooth system performance.
• Microstep resolutions programmable via dip switch array, from full-step to 1/128 microstepping.
• Optically isolated inputs reduce noise.
• Alarm outputs for fault diagnosis.
• Suitable for Nema23 and Nema24 sized closed-loop stepper motors.
• Support Pulse/Direction, CW/CCW or RS232 control modes. (Step/Dir control recommended)
• Overvoltage and overcurrent protection.

HBS57 Closed-loop Stepper Motor Driver Specifications:

• Supply voltage: 20 to 50 VDC
• Output current: Up to 5.0A Peak (Load Dependent)
• Logic signal current: 7 to 20mA
• Pulse input frequency: 200 kHz
• Encoder Resolution (PPR): 1000
• Isolation resistance: 500 MΩ
• Operating temperature: 0 to 50 °C
• Operating Humidity: 40 to 90%RH
• Vibration: 5.9 m/s² Max
• Weight: Approx. 300 g
• Dimension: 118 x 75x 34 mm

HBS57 Stepper Motor Driver Engineering Drawings

Use the Closed-loop Stepper Motor and driver bundle to drive:

• Nema23/24 compatible CNC machines
• Laser Cutters
• Plasma Cutters
• Robotic Actuators
• Automated Linear Actuators

Tips and Tricks

• The closed-loop stepper motors are best powered by a 36V or 48V power supply for higher speed and greater torque.
• For existing CNC builds, use these motors with 8x8mm jaw couplings for a drop-in replacement.